Spray paint your outdoor seating area with Weathershield®

Before you start, move furniture and clear the space.

Clean the area, brush away any dirt and wipe down the area using Selleys Sugar Soap.

Use a brush to remove imperfections; if needed, fill gaps and sand any imperfections.

Lightly sand any pre-painted surfaces.

Cover the floor with a drop sheet and mask off around the edges.

When spraying with Weathershield®, you need to dilute the paint with up to 10% water.

Stir the diluted paint to ensure a consistent consistency.

Pour the paint into the spray gun and test the pressure of the paint on a testing sheet.

Use the circular jet for corners, edges and hard-to-reach surfaces.

For the internal walls of the outdoor seating area, turn the nozzle to the vertical setting.

Start spraying from one side, working across the wall in long vertical strokes.

Start moving the sprayer before you press the trigger to prevent too much paint in one area.

Release your finger from the trigger when you get to the edges to prevent too much paint in one area and dripping.

Wait two hours for the first coat to dry.

Follow the same steps, 2 or 3 coats may be required.

If painting the ceiling, follow the same process, rotating the tube inside when painting at a different angle. We recommend doing the ceiling first.

Ensure you thoroughly clean the spray gun after use.