• Plasterboard 

• Brick 

• Cement sheet 

• Timber 

• Set plaster

• Fibrous plaster 

• Plasterglass 

• Steel

• Wrought iron

Surface must be clean, dry and free from dust, oils and grease. 

Previously painted surfaces in good condition: 

• Dust, then clean with Selleys® Sugar Soap. 

Previously painted surfaces with cracks or holes repaired with filler: 

• Spot primer repairs with Dulux 1Step® Prep Water Based Primer, Sealer & Undercoat. 

Glossy surfaces: 

• Lightly sand to a dull finish. 

• Then apply Dulux 1Step® Prep Water Based Primer, Sealer & Undercoat. 

Unpainted plasterboard, brick, cement board, timber: 

• Apply one coat of Dulux 1Step® Prep Water Based Primer, Sealer & Undercoat. 

Unpainted set plaster, fibrous plaster, plaster glass: 

• Apply one coat of Dulux PRECISION® Sealer Binder. 

Unpainted steel/wrought iron: 

• Remove rust. 

• Apply one coat of Dulux 1Step® Oil-Based Primer, Sealer & Undercoat.

• Stir paint thoroughly with a flat paddle using an up-and-down scooping action. 

• Apply two coats of Dulux Aquanamel®, sanding lightly between coats. 

• Ensure the first coat is completely dry before applying the second.

Do not pour leftover paint down the drain. 

Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. 

For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.

Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.

Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. 

Do not reuse container unless thoroughly decontaminated. 

For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz