RapidFinish™ Multipurpose Fine Spray Unit
About RapidFinish™ Multipurpose Multipurpose Fine Spray Unit
Painting with Dulux RapidFinish™ Exterior Low Sheen Acrylic has never been easier with the Dulux RapidFinish™ Multipurpose Fine Spray Unit. It has a variable flow rate for faster application, simple handling and cleaning and provides a quality finish.
Application
At a glance
- Limited overspray
- Simple handling and cleaning
- Regulated flow
- Two-year warranty
- Quality finish
Areas to use
Surfaces
• Painted surfaces
• Pre-primed timber
• Brick masonry
• Fibro and fibre cement board
• Galvanised iron
• ZINCALUME®
• Steel and
• Wrought iron
Previously Painted Surfaces
• All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint.
• Efflorescence or mould on masonry or concrete surfaces must be treated.
• Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour.
• To avoid this, check the adhesion of the old paint by cutting an X through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off.
• If the old paint comes off with the tape it should be removed before repainting.
Airless/Conventional Spray
• Stir Dulux RapidFinish® paint well before use with a broad flat paddle using an up and down scooping action.
• Use spray unit to apply Dulux RapidFinish® as per product instructions.
Shop with us when you want, how you want.
Trade Direct
Download the app and register to receive a $10 voucher to spend on your first purchase of interior broadwall paint.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.