Dulux Professional® Semi Gloss Enamel is an oil-based interior product.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Use Dulux Professional® Semi Gloss Enamel as a high quality, hard wearing semi gloss enamel on correctly primed or undercoated interior timber, masonry, plaster and metal surfaces.
• Remove grease, oil, etc. by washing with a commercial paint cleaner.
• Thoroughly rinse and allow to dry.
• Acid and alkali contamination should be removed by thorough rinsing with clean water.
• fflorescence or mould on plaster, masonry or timber surfaces must be treated.
• Rust, millscale, oxide deposits, loose or flaking paint or other foreign material on metal surfaces should be removed in accordance with the requirements of the chosen system, then apply primer, sealer or undercoat as required.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
For more information visit paintback.com.au
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit paintback.com.au
Download the app and register to receive a $10 voucher to spend on your first purchase of interior broadwall paint.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.