Acratex® AcraGuard
About Acratex® AcraGuard
Dulux Acratex AcraGuard is a pigmented, water based 100% acrylic coating that is designed as a self priming top coat to overcoat masonry substrates like Fibre Cement Sheet, Off Form, tilt-up & Pre-cast Concrete it is simple to apply, has extended wet edge, dries to a Matt Finish to reduce the appearance of lap marks and picture framing.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- Extensive colour range
- Water-based
- Water resistant
- Easy, safe and economical clean up
- 10 year material warranty
- Long-term durability
Areas to use
Previously Painted Surfaces
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush, roller
Product should be thoroughly mixed before use. Refer to the Dulux Acratex Application Manual for detailed instructions.
Unused paint
Unused paint: Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. Empty paint containers: Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. Do not reuse container unless thoroughly decontaminated. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Shop with us when you want, how you want.
Trade Direct
Download the app and register to receive a $10 voucher to spend on your first purchase of interior broadwall paint.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.