Spray paint your fence with Weathershield®

Clear the area, remove any bikes or cars.

Tie back and cover your garden.

Brush away any dirt from the fence.

Lay down a drop cloth to protect the area.

On an older fence, use a de-mossing solution to combat any mould.

When spraying with Weathershield®, you need to dilute the paint with up to 10% water.

Stir the diluted paint to ensure a consistent consistency.

Pour the paint into the spray gun and test the pressure of the paint on a testing sheet.

Use the circular jet for corners, edges and hard-to-reach surfaces.

For the vertical pickets, turn the nozzle to the horizontal setting.

To protect the garden from overspray, hold up a piece of cardboard behind the top of the surface.

Start on one side and point the spray gun directly ahead.

Work along the fence in long vertical strokes.

Release your finger from the trigger when you reach the top and bottom to prevent too much paint in one area.

Wait two hours for the first coat to dry.

Follow the same steps, 2 or 3 coats may be required.

Ensure you thoroughly clean the spray gun after use.