Duramax® Concrete Effect

• The surface must be clean and dry, free from grease, rust and dirt. 

• Protect adjoining surfaces from overspray. 

• Undercoat dark surfaces with Dulux Duramax® Undercoat to achieve the brightest finish. 

• Prime all bare steel and iron with Dulux Duramax® Metal Primer. 

• Prime all plastic with Dulux Duramax® Plastic Primer.

Before spraying: 

• Shake can for at least three minutes before use and regularly during use. 

• Lower temperatures and high humidity will slow the drying and affect the gloss level. 

• Avoid spraying when air or surface temperature is below 10°C or above 30°C. 

Spray application: 

• Hold can upright 15 to 25cm from the surface. 

• To ensure surface compatibility, test spray on an inconspicuous area. 

• Spray with smooth, even strokes parallel to the surface. 

• Apply with several light mist coats rather than one heavy coat. 

• Allow for drying time of two minutes between each coat.

Storage 

• Store in a cool, dry, well-ventilated place and and away from oxidising agents and corrosive materials. 

• Protect from sunlight. 

• Store away from sources of heat and/or ignition. 

• Do not expose to temperatures exceeding 50°C.  

Unused paint 

Spray unwanted paint onto newspaper and allow to dry, and then disposed of via domestic waste collections. 

Disposal of empty aerosol containers via domestic recycling programs differ between local authorities. 

For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.

Empty paint containers: 

Empty aerosol cans are recyclable via steel can recycling programs. 

Disposal of empty aerosol containers via domestic recycling programs differ between local authorities. 

Check with your local council first.

For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.