Dulux Wash&Wear® +PLUS Anti-Bac Low Sheen was developed to resist the growth of bacteria and mould on walls that may trigger asthma and allergy symptoms. The hard-wearing surface is fortified with antimicrobial protection to defend against the growth of harmful bacteria and mould. Wash&Wear® +PLUS Anti-Bac contains 101 Barrier Technology® so you can wipe away most marks with a wet cloth, meaning your walls will look freshly painted for years.
*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
The hard wearing surface formed by Wash&Wear’s exclusive 101 Barrier Technology is fortified with antimicrobial protection to defend against the growth of bacteria and mould. This helps to maintain indoor air quality.
• Plasterboard
• Brick
• Cement sheet
• Bare timber
• Set plaster
• Fibrous plaster
• Plasterglass
• Concrete
• Masonry
Dulux Wash&Wear +Plus Anti-Bac is guaranteed for 7 years against mould growth as long as Dulux Wash&Wear +Plus Anti-Bac is applied in accordance with the instructions for use. If mould growth occurs within 7 years of application we’ll replace the paint free of charge to rectify the affected areas. This warranty is limited and excludes all labour and other charges. To make a claim under the warranty, please contact Dulux Customer Service AUST 13 25 25, NZ 0800 800 424 and provide details of your claim. You must show proof of purchase and bear all expenses incurred in making a claim. The benefits of this warranty are in addition to other rights and remedies under any applicable law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
Surface must be clean, dry and free from dust, oils and grease.
For Cracks or holes with filler:
• Spot prime repairs with Dulux 1Step® Prep Water Based Primer, Sealer & Undercoat.
Glossy surfaces:
• Lightly sand to a dull finish.
Unpainted plasterboard, brick, cement sheet, bare timber:
• One coat of Dulux 1Step® Prep Water Based Primer, Sealer & Undercoat.
Set plaster, fibrous plaster, plasterglass:
• One coat of Dulux PRECISION® Sealer Binder.
1. Stir paint thoroughly with a flat paddle using an up-and-down scooping action.
2. Cut-in around the edges with a brush, then roll up to the border whilst it is still wet.
3. Apply two coats ensuring that the first coat is completely dry before applying the second.
Treating existing mould
1. Remove mould with Selleys® Rapid Mould Killer or by scrubbing with a scouring pad and bleach solution (one part bleach to three parts water).
2. Leave solution on the surface for 15 minutes then wash with clean water and wipe dry.
Several applications may be necessary to remove stubborn mould blooms.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.