Create a subtle textured look with Dulux Light Texture. This combination of a fine grain finish with the soft variation in colour creates a sense of warmth and dimension. Available in a curated range of neural, earthy tones.
Ideal for creating a subtle textured finish on internal and external surfaces.
Good Condition - Dust, then clean with Selleys® Sugar Soap.
Cracks or holes repaired with filler - pot prime repairs with Dulux 1 Step® Prep Glossy Surfaces.
Glossy Surfaces - Lightly sand to a dull finish.
Plasterboard, Brick, Cement - Apply 1 coat of Dulux 1 Step Prep.
Bare Timber - Apply 1 coat of Dulux 1 Step Prep.
Set Plaster, Fibrous Plaster, Plasterglass - Apply 1 coat of Dulux Sealer Binder.
Do not apply if the surface temperature is greater than 30°C or below 10°C, or likely to fall below 10°C during the application or drying period.
• Stir thoroughly prior to use.
• Apply two coats by brush, or a medium nap roller.
• Ideally a block brush or 12-15 nap roller.
• Touch dry in 1 hour.
• Allow minimum 2 hours dry time between coats.
• Allow 6 hours dry time.
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Dulux has curated a range of 16 on-trend neutral colours that complement the textured finish of Dulux Light Texture Effect. This finely grained matt finish will transform your home into a cosy haven with a contemporary feel.