Concrete & Paving Anti Slip Additive
About Concrete & Paving Anti Slip Additive
Dulux Concrete & Paving Anti-Slip Additive is specially formulated for use in Dulux Concrete & Paving Protective Sealer. Ideal for use in areas that become slippery when wet such as pool surrounds, sloping paths and outside steps. Dulux Concrete & Paving Anti-Slip Additive achieves a minimum of a P4 slip rating when applied as directed, as text to AS 4586:2013*.
*NOTE: Due to slip risk do not apply to gradients greater than 8:1. If unsure about your gradient please contact Dulux Help & Advice AUST 12 25 25, NZ 0800 800 424.
Downloads
At a glance
- For a slip resistant finish
- Available in 120g or 300g
Areas to use
Performance guide
Dulux Concrete & Paving Anti-Slip Additive is specially formulated for use in Dulux Concrete & Paving Protective Sealer.
NOTE: Due to slip risk do not apply to gradients greater than 1:8 or
angles steeper than 7° even when anti slip additive is used.
If unsure about your gradient please contact Dulux Help & Advice AUST 13 25 25, NZ 0800 800 424.
Surfaces
Ideal for use in areas that become slippery when wet such as pool surrounds, sloping paths and outside steps.
NOTE: Due to slip risk do not apply to gradients greater than 1:8 or
angles steeper than 7° even when anti slip additive is used.
If unsure about your gradient please contact Dulux Help & Advice AUST 13 25 25, NZ 0800 800 424.
Brush, roller
• Stir in entire contents of colourless beads into 10L of paint prior to application, or 30g of colourless beads per litre of paint needed.
• Apply paint following directions on paint can.
Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.
